Zoeller® 137-0007 Flow-Mate 130 Single Phase Single Seal Submersible Pump, 93 gpm, 1-1/2 in NPT Outlet, 1/2 hp, Cast Iron

96614 MFG #: 137-0007
$530.00 / ea

Zoeller® Submersible Pump, Single Phase Single Seal, Series Flow-Mate 130, 93 gpm, 1-1/2 in NPT Outlet, 26 ft Maximum Head, 1/2 hp, 115 V, 10.7 A, 60 Hz, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 12-3/4 in H

In high head dewatering or effluent applications where pumping performance is critical, this robust family of pumps is known for reliability, durability and performance. These pumps are especially suited for harsh environments. Zoeller's cool run design and corrosion-resistant, powder coated epoxy finish add up to a long-lasting, trouble-free product.

QTY
  • Features
  • Corrosion-resistant, powder coated epoxy finish
  • Durable, cast iron construction with switch case motor and pump housing, base and impeller
  • Float operated, 2 pole mechanical switch (automatic units only)
  • No sheet metal parts to rust or corrode
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected (1 ph only) motor
  • Upper and lower sleeve bearings running in bath of oil
  • Carbon and ceramic shaft seal
  • Stainless steel screws, bolts, guard, handle, arm and seal assembly
  • 130 deg F (Extra duty: 140 deg F) maximum temperature for effluent or dewatering
  • Passes 5/8 in spherical solids
  • No screens to clog
  • On point - 10 in, off point - 2-3/4 in
  • Simplex and duplex package systems available
  • Variable level control systems available, designed for heavy-duty effluent applications
  • Automatic and non automatic models available
  • Electrical alternators for duplex systems are available and supplied with an alarm
  • Mechanical alternators for duplex systems are available with or without alarm switches
  • Effluent or dewatering submersible pump for septic tank, low pressure pipe (LPP) and enhanced flow STEP systems
  • Castings of model 137 is cast iron ASTM class 25, 2500# tensile strength
  • Oil filled cooling
  • Standard/Approvals: AISI 1215 Motor Shaft, ASTM Cast Iron Body, CSA Certified, SSPMA Standard, UL Listed