Bradford White® Defender Safety System® RG2DV50S6N-SLD Gas Water Heater, 42000 Btu/hr Heating, 50 gal Tank, Natural Gas Fuel, Direct Vent, 45 gph at 90 deg F Recovery, Ultra Low NOx: No, Domestic

1248207 MFG #: RG2DV50S6N-SLD
$3,325.00 / ea
Bradford White® Defender Safety System® RG2DV50S6N-SLD Gas Water Heater, 42000 Btu/hr Heating, 50 gal Tank, Natural Gas Fuel, Direct Vent, 45 gph at 90 deg F Recovery, Ultra Low NOx: No, Domestic
  • Dimensions: 22 in Dia x 31 in D x 72-1/2 in H
  • Domestic/Import: Domestic
  • Energy Factor: 0.63
  • Fuel Type: Natural Gas
  • Gas Connection: 1/2
  • Heating Capacity: 42000
  • Ignition Type: Piezo
  • Pressure Rating: 150
  • Recovery Rate: 45
  • Tank Capacity: 50
  • Ultra Low NOx: No
  • Vent Size: 3 x 5
  • Vent Type: Direct
  • Water Connection: 3/4 in NPT

Bradford White® Defender Safety System® Gas Water Heater, 42000 Btu/hr Heating, Natural Gas, 1/2 in Gas Connection, 50 gal Tank, Piezo Ignition, Direct Vent, 5 in Vent, 45 gph at 90 deg F Recovery, Energy Factor: 0.64, 3/4 in NPT Water Connection, 150 psi, Ultra Low Nox: No, 31 in D x 72-1/2 in H, Domestic

Direct Vent water heaters utilize a co-axial (pipe inside a pipe) vent pipe that takes air in from the outside (outer vent) and vents combustion gases directly back to the outside (outer vent). It is the perfect choice for situations with insufficient combustion air. No electricity required.

QTY
Add to List
  • Features
  • Bradford White® ICON System™ - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy to operate the gas valve and microprocessor, no need for external electricity
  • Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
  • Advanced Temperature Control System - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
  • Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
  • Pilot On Indication - Flashing green LED provides positive indication that pilot is on
  • Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve
  • Closed combustion - All air for combustion is taken directly from the outside, the co-axial vent pipe (pipe inside a pipe) draws combustion air in through the outer pipe, and exhausts the products of combustion through the inner pipe, the co-axial vent pipe at the top of the unit can be rotated for venting flexibility
  • Reinforced seals - Seals surround the closed combustion chamber and the FVIR inner door, preventing the ignition of flammable vapors outside of the water heater
  • Maintenance free - The vent piping and the closed combustion chamber with reinforced seals does not require regular cleaning under normal operating conditions
  • Sight Window - Offers a view into the combustion chamber to observe the operation of the pilot and burner
  • Factory installed Hydrojet® total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank
  • Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Cast aluminum air intake boot - A cast molded air intake boot provides exceptional installation durability
  • Telescoping solid vent kits - Multiple kits allow up to 8 ft vertical and 8 ft horizontal vent lengths
  • Flexible vent kit - The maximum vent length (horizontal and vertical) can be flexed to 100 in (horizontal termination only)
  • Insulation System - 2 in Non-CFC foam insulation covers surrounds the tank surface, saving energy by reducing the amount of heat loss
  • Pedestal base
  • Water connections - 3/4 in NPT Factory installed true dielectric fittings
  • Factory installed heat traps
  • Protective magnesium anode rod
  • Standard/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, NSF 372
  • INCLUDES: Temperature and Pressure Relief Valve
  • WARRANTY: 6 Years Limited Tank and Component Parts