Sharkbite® Pressure Regulating Valve, Series: EB45, 1 in Nominal, Push-Fit, 45 psi, 180 deg F, Media: Water, 6.12 in Inlet to Outlet Length, 4.35 in Top to Inlet Center, Bronze Body, Brass Trim, EPDM O-Ring, Domestic
The EB-45 Direct SharkBite with Slip Feature (EB45-SDSB) is a lead free half-cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve. The EB45-SDSB features integral SharkBite connections in 1/2 in and 3/4 in sizes along with an added slip feature for easy installation. Connect the SharkBite pressure regulating valve to copper tubing and CTS CPVC with ease. The added slip feature allows for simple replacement of an existing regulator or allows installation in an existing line where there is little to no slack in the pipe system. These valves are supplied by the factory with a standard delivery Setting of 45 psi but the outlet pressure can be adjusted from 10-70 psi without changing the spring. The EB45-SDSB is intended for use where supply line pressure does not exceed 200 psi and is suited for either cold or hot (to 180 degF) water service.