Haws® AXION® 9201EFE Emergency Tempering Thermostatic Mixing Valve, 6-1/8 in L, 1/2 in Inlet, Brass

1058968 MFG #: 9201EFE
$1,085.00 / ea
  • Type: Emergency Tempering
  • Nominal Size: 1/2 x 3/4
  • Dimensions: 6-1/8 in L x 2-5/8 in W x 5-1/4 in H
  • Flow Capacity: 1 to 12
  • Pressure Rating: 125
  • Body Material: Brass
  • Media: Hot/Cold Water
  • End Style: FNPT
  • Temperature Rating: 85

Haws® AXION® Thermostatic Mixing Valve, Emergency Tempering, 1/2 in Inlet, 6-1/8 in Length, Brass

Model 9201EFE (patent pending) is a thermostatic mixing valve that mixes hot and cold water to supply tempered water of up to 12 gpm (45.4 L) for emergency eyewash fixtures. Unit employs a paraffin filled thermostatic mixing element. Lowest internal pressure drop where supply pressure is low and a high Cold Water Bypass flow rate of 10 gpm (37.8 L). The modular brass design with a one piece casting uses internal check stops, over-sized valve seats, a shuttle design that eliminates valve binding and a funnel design to improve temperature control with better mixing at low flow rates. Lime and calcium resistant components are used throughout. The outlet temperature factory setting is 85 deg F (29 deg C). Maximum operating pressure: 125 psi (8.62 Bar). Temperature adjustment range 60 - 95 deg F (16 - 35 deg C). Min/max inlet hot water temperature: 120 deg /180 deg F (49 deg /82 deg C), with recommended inlet temperature: 140 deg F (60 deg C). Min/max inlet cold water temperature: 40 deg /70 deg (4.4 deg /21.1 deg C). Inlet 1/2 in FNPT. Outlet 3/4 in FNPT.

  • Features
  • A flow rate from 1 to 12 gpm (45.4 L) for better temperature control across the operating range
  • Lowest internal pressure drop for this class of valve (Advantage where supply pressure is low)
  • Wax based thermostat technology for fast response time with proven highly reliable temperature control
  • Highest cold water bypass flow rate in the industry (83% of rated tepid flow rate)
  • AXION® superior design and technology provide a complete safety solution for increased victim comfort
  • Modular brass design with internal check stops
  • Over-sized valve seats resist failures caused by foreign matter
  • A new and efficient shuttle design eliminates valve sticking
  • A custom funnel design improves temperature control at low flow rates
  • Cold water by-pass valves are closed during normal operation, regardless of flow rate
  • Standard/Approvals: ASSE 1071, ANSI Z358.1, CSAus Certified, Meets requirements of the Buy American Act
  • WARRANTY: Limited Warranty