Saniflo® Saniplus® 002 Macerator Pump, 1.28 gpf, 2 in Inlet, 0.5 hp

909266 MFG #: 002
$1,138.15 / ea
Saniflo® Saniplus® 002 Macerator Pump, 1.28 gpf, 2 in Inlet, 0.5 hp
  • Amperage Rating: 4.5
  • Dimensions: 20 in W x 9-1/4 in D x 12-7/8 in H
  • Flow Rate: 1.28
  • Frequency Rating: 60
  • Horsepower: 0.5
  • Inlet Size: 2
  • Temperature Rating: 104
  • Voltage Rating: 115

Saniflo® Saniplus® Macerator Pump, 1.28 gpf, 2 in Inlet, 0.5 hp, 115 VAC, 4.5 A, 60 Hz, 104 deg F, 20 in W x 9-1/4 in D x 12-7/8 in H

The Saniplus is a 1/2 HP pump system used to install a complete bathroom up to 15 feet below the sewer line, or even up to 150 feet away from a soil stack. It incorporates a macerating system which can handle human waste and toilet paper in residential applications. The blade is made out of a hardened stainless steel material which eliminates the need for any service or replacement.

QTY
Add to List
  • Features
  • Discharges the waste through a 3 /4 or 1 in rigid pipe
  • Non-return valve is included on the discharge elbow assembly provided with the system
  • Elbow can be rotated 360 degrees depending on the discharge installation
  • Has been designed with a 1-1/2 in vent connection on the top of the lid
  • All plumbing codes require connection to a vent system
  • Must be connected to Saniflo's 1.28 gpf rear discharge toilet
  • Will also discharge gray water from any sink, bath/shower or urinal
  • Wastewater will drain into the system via two 2 in inlets with built-in check valves on either side of the housing, note that when adding a bathtub/shower, the base should be raised up by a minimum of 6 in off the floor
  • 0.5 hp oil-filled thermally protected motor
  • 45 uF capacitor
  • 47-1/2 in power cord
  • = 53 dBA noise level measured at 3 ft
  • 15 ft vertical 17 gal/min, 150 ft horizontal 27 gal/min discharge
  • 3/4 in discharge pipe diameter
  • Standard/Approvals: ADA Compliant, ASME A112.3.4, CSA B45.9, UPC Certified, WaterSense EPA Certified
  • WARRANTY: 5 Years Limited on Cutting Blade