McDonald® 6634-153 K Series, 22050K2AJ 1-Phase High-Head Effluent Pump, 10 gpm Maximum, 170 ft Maximum Head, 115 VAC
- Cord Type: SJOW
- Domestic/Import: Domestic
- Horsepower: 1/2
- Material: Thermoplastic
- Maximum Flow Rate: 10
- Maximum Head: 170
- Outlet Size: 1-1/4
- Series: K Series
- Type: High-Head
- Voltage Rating: 115
- Phase: 1
McDonald® Effluent Pump, 1-Phase High-Head, Series: K, 10 gpm Maximum Flow Rate, 1-1/4 in Outlet, 170 ft Maximum Head, 1/2 hp, 115 VAC, SJOW Cord, Thermoplastic, Domestic
Reinforced Thermoplastic motor bracket and discharge with built-in guide bearing. Sizes range from 1/2 - 1-1/2 hp. 300 series stainless steel top bearing and motor coupling. The 1/2 hp through 1 hp uses composite and 1-1/2 hp uses stainless steel motor. Two wire single phase models include pump, motor and 10 ft "SJOW" lead, 25 ft, 50 ft and 100 ft available. All four inch submersibles are supplied with grounded leads meeting the National Electrical Code (N.E.C.) specifications. The performance curves on the following page will assist you in choosing the pump that meets your needs.
- Features
- Stainless steel pump shell and pump shaft
- Reinforced thermoplastic diffusers and impellers
- Internal, anti-spin check valve standard
- Powered by NEMA standard composite submersible motors
- Thermoplastic intake screen and cable guard
- 10 ft lead
- 1-1/4 in FNPT discharge
- The weighted average of the wetted surface of this no lead product contacted by consumable water contains less than one quarter of one percent (0.25%) lead
- Standard/Approvals: Meets the National Electrical Code (N.E.C.) Specification