PHD 350 0062PL Import Beam Clamp, 5/8 in Rod, 600 lb Load, Malleable Iron, Plain

7581 MFG #: 350 0062PL
$27.73 / ea
PHD 350 0062PL Import Beam Clamp, 5/8 in Rod, 600 lb Load, Malleable Iron, Plain
  • Finish: Plain
  • Load Capacity: 600
  • Material: Malleable Iron
  • Rod Size: 5/8
  • Series: FIG 350
  • Suitable For Use With: 8 in Pipe

PHD Import Beam Clamp, FIG 350 Series, 5/8 in Rod, 600 lb, For Use With: 8 in Pipe, Malleable Iron, Plain

Designed for attaching hanger rod to the top flange of a beam or bar joist, where the flange thickness does not exceed 3/4 in. The open U design permits rod adjustment.

QTY
Add to List
  • Features
  • Malleable iron with hardened steel cup point set screw and locknut
  • When a torque wrench is unavailable, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added
  • Underwriters laboratories listed in the US (UL), Canada (CUL)
  • Caution should be taken not to over tighten the set screw
  • 3/8 to 1/2 in set screws
  • Standard/Approvals: ANSI/SP 69/58 (Type 19)|cULus Listed|Federal A-A-1192A (Type 19)|FM Approved