PHD 345 0037EG Top Beam Clamp, 3/8 in Rod, 610 lb Load, Carbon Steel, Electro-Galvanized

7098 MFG #: 345 0037EG
$13.27 / ea
PHD 345 0037EG Top Beam Clamp, 3/8 in Rod, 610 lb Load, Carbon Steel, Electro-Galvanized
  • Finish: Electro-Galvanized
  • Load Capacity: 610
  • Material: Carbon Steel
  • Rod Size: 3/8
  • Series: FIG 345
  • Suitable For Use With: 4 in Pipe

PHD Top Beam Clamp, FIG 345 Series, 3/8 in Rod, 610 lb, For Use With: 4 in Pipe, Carbon Steel, Electro-Galvanized

Designed for attaching a hanger rod to the top flange of a beam or bar joist where the flange thickness does not exceed 3/4 in (19.05 mm). The open U design permits rod adjustment.

QTY
Add to List
  • Features
  • Low carbon steel with hardened steel cup point set screw and locknut
  • Note : When a torque wrench is unavailable, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added
  • Set screw must contact the sloped side of the I-beam, channel or other applicable building structure
  • Clamp must always be installed in top orientation, with the arrow mark on clamp pointing up
  • Underwriters laboratories listed in the US (UL) and Canada
  • 60 in-lb torque set screw
  • Standard/Approvals: ANSI/SP 69/58 (Type 30), cULus Listed, Federal A-A-1192A (Type 30), FM Approved
  • WARRANTY: 1 Year