Oatey®

Oatey® 31122 Low VOC Very Heavy Body Very Fast Set PVC Solvent Cement, 946 mL Container, Gray, For Use With All Classes and Schedules of PVC Pipe and Fittings with Interference Upto 18 in Dia for Non-Pressure and 12 in Dia for Pressure

24523 MFG #: 31122
$50.52 / ea
Oatey® 31122 Low VOC Very Heavy Body Very Fast Set PVC Solvent Cement, 946 mL Container, Gray, For Use With All Classes and Schedules of PVC Pipe and Fittings with Interference Upto 18 in Dia for Non-Pressure and 12 in Dia for Pressure
  • Color: Gray
  • Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Methyl Ethyl Ketone
  • Container Size: 946
  • Curing Time: 2
  • Odor/Scent: Solvent
  • Setting Time: 3 to 4
  • Suitable For Use With: All Classes and Schedules of PVC Pipe and Fittings with Interference Upto 18 in Dia for Non-Pressure and 12 in Dia for Pressure
  • Temperature Rating: 40 to 110
  • Type: Low VOC Very Heavy Body Very Fast Set

Oatey® PVC Solvent Cement, Low VOC Very Heavy Body Very Fast Set, 946 mL Container, For Use With: All Classes and Schedules of PVC Pipe and Fittings with Interference Upto 18 in Dia for Non-Pressure and 12 in Dia for Pressure, Gray, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Methyl Ethyl Ketone, 3 to 4 min Setting, 2 hr Curing, 40 to 110 deg F

Oatey® PVC Fast Set Heavy Duty Gray Cement is recommended for DWV, potable water and irrigation applications. Made to quickly install irrigation pipe and fittings, it builds up to fill gaps in large diameter pipe and loose fitting joints, and is easy to apply with included in-lid dauber. This gray, heavy duty, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings with interference fit up to 18 in. diameter for non-pressure and 12 in. diameter for pressure pipes. Oatey products have earned the trust of plumbing professionals for over 100 years.

QTY
Add to List
  • Features
  • Videos
  • Formulated for quick installation of irrigation pipe and fittings
  • Builds-up for large diameter installations
  • Fills gaps in large diameter pipe and loose fitting joints
  • 250 psi at 2 hr, 500 psi at 16 hr, 900 psi at 72 hr lap shear strength
  • Minimum 1600 cps at 73 deg F +/- 2 deg F viscosity
  • 7.86 +/-0.2 lb/gal density
  • 3 to 4 min at 30 to 50 deg F/3 min at 50 to 70 deg F/2 min at 70 to 90 deg F setting time
  • Standard/Approvals: ASTM D2564|BAAQMD Method 40 and Various Environmental Requirements|California South Coast Air Quality Management Districts (SCAQMD) 1168/316A|IAPMO Listed|NSF 61