Oatey®

Oatey® Blue Lava™ 32160 Low VOC Medium Body Medium Hot Very Fast Set PVC Solvent Cement, 4 oz Container, Blue, For Use With All Classes and Schedules of PVC Pipe and Fittings Upto 6 in Dia with Interference Fit

1159293 MFG #: 32160
$8.85 / ea
Oatey® Blue Lava™ 32160 Low VOC Medium Body Medium Hot Very Fast Set PVC Solvent Cement, 4 oz Container, Blue, For Use With All Classes and Schedules of PVC Pipe and Fittings Upto 6 in Dia with Interference Fit
  • Color: Blue
  • Composition: Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Methyl Ethyl Ketone, Silica, Amorphous, Fumed
  • Container Size: 4
  • Curing Time: 30
  • Odor/Scent: Solvent
  • Setting Time: 4 to 5
  • Suitable For Use With: All Classes and Schedules of PVC Pipe and Fittings Upto 6 in Dia with Interference Fit
  • Temperature Rating: 40 to 110
  • Type: Low VOC Medium Body Medium Hot Very Fast Set

Oatey® Blue Lava™ PVC Solvent Cement, Low VOC Medium Body Medium Hot Very Fast Set, 4 oz Container, For Use With: All Classes and Schedules of PVC Pipe and Fittings Upto 6 in Dia with Interference Fit, Blue, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, 4 to 5 min Setting, 30 min Curing, 40 to 110 deg F

Oatey® Blue Lava Medium Bodied Fast Set Hot Cement is recommended for DWV repair, irrigation, and pool and spa applications. It is formulated for wet conditions, quick pressurization and fast installation, and is easy to apply with included in-lid dauber. This blue, medium body, very fast setting PVC cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

QTY
Add to List
  • Features
  • Videos
  • Preferred formula for emergency, repair and cut in work
  • Extremely fast setting thick formula clings to pipe in wet and underwater applications
  • Very fast setting cement, formulated for wet conditions and/or quick pressurization and fast installation
  • No primer needed on non-pressure DWV, where local codes permit
  • 250 psi at 2 hr, 500 psi at 16 hr, 900 psi at 72 hr lap shear strength
  • Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
  • 4 to 5 min at 30 to 50 deg F/3 to 4 min at 50 to 70 deg F/1 to 2 min at 70 to 90 deg F setting time
  • Standard/Approvals: ASTM D2564|BAAQMD Method 40 and Various Environmental Requirements|California South Coast Air Quality Management Districts (SCAQMD) 1168/316A|Greenguard Gold Approved|IAPMO Listed|NSF/ANSI 61|UL Listed