WATTS® LF800M4-QT Anti-Siphon Vacuum Breaker, 1 in, 150 psi, 7.5 fps, Cast Copper Silicon Alloy

1156251 MFG #: 0792012
/ ea

WATTS® Anti-Siphon Vacuum Breaker, Series LF800M4-QT, 1 in Nominal Size, 7.5 fps, 150 psi Working, Cast Copper Silicon Alloy Body, Noryl® Plastic, 7-1/2 in H x 7-1/2 in W

Series LF800M4QT Lead Free* Anti-Siphon Pressure Vacuum Breakers prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage. It consists of Lead Free* cast copper silicon alloy construction, silicone rubber check valve disc, plastic check valve seat, stainless steel springs, a bonnet with silicone rubber O-ring seal, a lightweight plastic disc float, tee handle or lever handle shutoffs, and test cocks for winterization draining. Series LF800M4QT is ideal in health hazard continuous pressure applications such as irrigation systems and industrial process water systems where the water enters the equipment at or below its flood rim. Maximum Pressure:150 psi (10.3 bar), Minimum Pressure: 15 psi (55kPa)

QTY
  • Features
  • Replaceable plastic seat
  • Easy maintenance of internal parts
  • Acetal bonnet acts as freeze plug to prevent body damage
  • O-ring bonnet seal for less possibility of fouling
  • Silicone seat disc for durability
  • Test cocks positioned for easy testing and winterization
  • Compact space saving design
  • Standardly equipped with tee handle quarter turn ball valve shutoffs 1/2 to 1 in, the 1-1/4 to 2 in feature lever handles
  • No special tools required for servicing
  • Lead free cast copper silicon alloy
  • Stainless steel springs
  • Celcon bonnet
  • Silicone Rubber vent disc
  • Polypropylene disc holder float
  • Silicone Rubber check valve disc
  • 33 to 140 deg F
  • The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
  • Vacuum breakers are not designed, tested or approved to protect against backpressure backflow or water hammer shock
  • For protection against backpressure backflow, install Watts LF009 reduced pressure zone backflow preventer
  • For protection against water hammer shock install a Watts Series LF15 water hammer arrestor utilizing good plumbing practice
  • Standard/Approvals: ANSI/ASSE 1020, Approved by the foundation for Cross-Connection Control and Hydraulic Research at the University of Southern California, CSA Certified, USC Manual Section 10, UPC Listed