Zoeller® 53-0001 Mighty-Mate M53 Automatic Effluent or Dewatering Submersible Pump, 43 gpm, 1-1/2 in Outlet, 3/10 hp, Cast Iron

9947 MFG #: 53-0001
$295.00 / ea
Zoeller® 53-0001 Mighty-Mate M53 Automatic Effluent or Dewatering Submersible Pump, 43 gpm, 1-1/2 in Outlet, 3/10 hp, Cast Iron
  • Amperage Rating: 9.7
  • Bearing Type: Sleeve
  • Cord Type: 3-Wire
  • Dimensions: 10.0625 in H x 10.06 in W
  • Flow Rate: 43
  • Frequency Rating: 60
  • Horsepower: 3/10
  • Impeller Type: Non-Clogging Vortex
  • Material: Cast Iron
  • Maximum Head: 19-1/4
  • Motor Speed: 1550
  • Outlet Size: 1-1/2
  • Series: Mighty-Mate M53
  • Temperature Rating: 130
  • Type: Automatic
  • Voltage Rating: 115
  • Phase: 1

Zoeller® Effluent or Dewatering Submersible Pump, Automatic, Series: Mighty-Mate M53, 43 gpm, 1-1/2 in Outlet, 19-1/4 ft Maximum Head, 3/10 hp, 115 VAC, 9.7 A, 60 Hz, 1550 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 10.0625 in H x 10.06 in W

The "Mighty-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent. Cast iron models include a powder coated epoxy finish to prevent corrosion and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance! This attention to detail is an inherent feature of every pump in this series, making it one of the most reliable in the industry.

QTY
Add to List
  • Features
  • Float operated, 2-pole mechanical switch and variable level, long cycle systems available
  • Corrosion resistant, powder coated epoxy finish
  • No sheet metal parts to rust or corrode
  • Stainless steel screws, switch arm, guard and handle
  • No screens to clog, watertight, neoprene square ring between motor and pump housing
  • Solid, buoyant, polypropylene float, oil-filled, hermetically sealed, automatic reset thermal overload protected motor
  • Upper and lower sleeve bearings running in bath of oil, entire unit pressure tested after assembly, carbon and ceramic shaft seal
  • Watertight and dust tight, permanently oiled bearings
  • Cast iron switch case, motor and pump housing, engineered thermoplastic base, glass filled, plastic impeller with metal insert
  • Entire unit pressure tested after assembly
  • Class B insulation, 7-1/4 in/3 in auto On/Off points
  • 1/2 in spherical solids handling, 9 ft cord, oil filled cooling
  • Cast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasket
  • AISI 1215 cold roll steel motor shaft
  • Single phase, shaded pole, 3 wire cord and plug
  • 1-1/2 in NPT discharge
  • Standard/Approvals: CSA/US Certified, SSPMA Certified, UL Listed