Maxitrol® 325-5L-3/4 Lever Acting Design Line Regulator With 12A39 Vent Limiter, 3/4 in, Thread, 2 psi, Aluminum Body

26836 MFG #: 325-5L-3/4
$94.80 / ea
  • Body Material: Aluminum
  • Dimensions: 5.3 in H
  • End Style: Thread
  • Inlet to Outlet Length: 5.9
  • Nominal Size: 3/4
  • Pressure Rating: 2
  • Series: 325
  • Temperature Rating: -40 to 205
  • Type: Lever Acting Design

Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 3/4 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 5.9 in Inlet to Outlet Length, Aluminum Body, 5.3 in H

Maxitrol's 325-L Series line pressure regulators are for 2 psi piping systems. 325 Series regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. 325 Series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.

  • Features
  • Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only
  • Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above
  • Minimum Regulation: Suitable for pilot flow applications
  • 65 psi emergency exposure limit (inlet side only)
  • 3/8 in NPT vent connection
  • 4.9 in swing radius
  • Maximum Individual Load: 425000 Btu/hr
  • Total load of multiple appliance combined capacity: 600000 Btu/hr
  • 1 to 2 psi inlet pressure
  • 7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)
  • Standard/Approvals: ANSI Z21.80, CSA 6.22 Certified Line Pressure Regulators