Oatey®

Oatey® Rain-R-Shine® 30895 Low VOC Medium Body PVC Cement, 1 gal Container, Blue

2553 MFG #: 30895
$149.91 / ea
Oatey® Rain-R-Shine® 30895 Low VOC Medium Body PVC Cement, 1 gal Container, Blue
  • Color: Blue
  • Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Silica, Amorphous, Fumed
  • Container Size: 1
  • Curing Time: 2
  • Odor/Scent: Solvent
  • Setting Time: 4 to 5
  • Suitable For Use With: Upto 6 in Dia PVC Pipe and Fittings
  • Temperature Rating: 40 to 110
  • Type: Low VOC Medium Body

Oatey® Rain-R-Shine® PVC Cement, Low VOC Medium Body, 1 gal Container, For Use With: Upto 6 in Dia PVC Pipe and Fittings, Blue, Solvent Odor/Scent, Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, 4 to 5 min Setting, 2 hr Curing, 40 to 110 deg F

Oatey® PVC Rain-R-Shine Medium Bodied Fast Set Blue Cement is recommended for pool and spa, irrigation, potable water, pressure pipe and DWV applications. It is formulated for wet conditions and quick pressurization, and is easy to apply. This blue, medium bodied, fast set cement can be used to solvent weld all schedules and classes of PVC pipe and fittings up to 6 in. diameter with interference fit. Oatey products have earned the trust of plumbing professionals for over 100 years.

QTY
Add to List
  • Features
  • Videos
  • Medium bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit
  • Low VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements
  • Very fast setting "Hot" cement formulated for wet conditions and/or quick pressurization and fast installation
  • No primer needed on non-pressure DWV, up through 6 in diameter where local codes permit
  • 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength
  • Minimum 500 cps at 73 deg F +/- 2 deg F viscosity
  • 7.83 +/- 0.2 lbs./gallon density
  • 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting
  • Standard/Approvals: ASTM D2564|IAPMO Listed|NSF 61 for PW|DWV and Sewer Waste