Bell & Gossett
Bell & Gossett 113223 Aquastat, 115/230 VAC, 16 A
Bell & Gossett Aquastat, 115/230 VAC, 16 A
Documents
- Thermostatic Switch Modes: OFF (open) at 120 deg F (48.9 deg C) water temperature and ON (closed) at 100 deg F (37.8 deg C) water temperature
- Thermostatic element: Bimetal, senses surface temperature of outside diameter of pipe
- Pipe Size: AQS-1/2 clips onto 1/2 in copper pipe or 3/8 in steel pipe (OD of pipe 5/8 in ) AQS-3/4 clips onto 3/4 in copper pipe or 1/2 in steel pipe (OD of pipe 7/8 in )
- Mounting: May be installed to sense temperature at the suction or discharge pipe of the pump
- Thermostat Covering: Epoxy (Environmentally sealed)
- Stainless steel pipe clip
- Sensing element: Bimetal
- Wire Leads: Insulated 18 in (457mm) No 18 AWG
- Connects to the lead wires in the connection box of any Bell & Gossett NBF/NRF/SSF circulator
- Suitable for 115/120 V, 60 Hz operation
- Provides thermostat control to the circulator It will turn OFF (open) at 120 deg F (489 deg C) water temperature and ON (closed) at 100 deg F (378 deg C) water temperature
- Epoxy thermostat covering
- Bimetal sensing element
- 1 phase
- Model AQS-1/2
- Standard/Approvals: UL Listed
Bell & Gossett Aquastat, 115/230 VAC, 16 A
Aquastat is designed to thermostatically turn any B&G NBF circulator ON and OFF. The AQ-1/2 or AQ-3/4 will switch the pump OFF at 120 deg F (48.9 deg C) and ON at 100 deg F (37.8 deg C). The aquastats are available in separate models that will sense the temperature for either 1/2 in or 3/4 in copper pipe. AUTOMATIC TIMER KIT and AQUASTAT COMBINATION - The automatic timer and aquastat kits can be used in combination. When they are used together, the pump will only circulate water when the ON time conditions are met and when water temperature is low enough to cause the aquastat to switch ON.
- Brand:Â Bell & GossettVoltage Rating:Â 115/230Amperage Rating:Â 16