DuraVent® FasNSeal® FSCL4 Support Clamp, 4 in ID, For Use With FasNSeal® Special Gas Vent, Stainless Steel
Vent Pipe Supports
MPN: 233689 4239138 MFG #: FSCL4
21.86000 / ea

DuraVent® FasNSeal® Support Clamp, 4 in Inside Dia, For Use With: FasNSeal® Special Gas Vent, Stainless Steel

All FasNSeal (single-wall) vent lengths and components feature patented built-in mechanical locking band and triple-lipped directional gaskets. All pipes and components are engineered with smooth clean welds located 90 deg from mechanical locking bands. This construction feature allows for ease of installation. The 1/2 in air space between the inner and outer wall on FasNSeal W2 helps to reduce the clearance to combustibles in addition to creating a heat shield for additional safety. All FasNSeal components which come in contact with exhaust gases and condensates are now silicone free. This important design and manufacturing feature greatly reduces the chances of system breakdown and failure. The main problems with silicone are there are too many adhesion factors which are very difficult to control and the process of binding similar materials with an epoxy, which can weaken the bond over time. Welded seams ensure a leak-free product that is meant to last.

  • Features
  • Use to support vertical and horizontal runs using threaded rod
  • Recommended every 10 ft on vertical runs and every 6 ft in horizontals
  • Use additional Support Clamps as needed
  • Use with natural gas or propane Categories II, III and IV appliances or Canada's Type BH Gas Vent Systems, having a maximum rated operating temperature of 480 deg F and a maximum positive pressure of 15 in (FasNSeal Flex 6 in) water column
  • Standard/Approvals: UL 1738, ULC S636