Oatey®
Oatey® No-Calk® 11866 Standard Base Roof Flashing, Steel, 3 in Pipe, 11 in W x 14-1/2 in L Base
Oatey® No-Calk® Roof Flashing, Standard Base, 14-1/2 in Base Length, 11 in Base Width, 3 in Pipe, For Use With: Slides Over DWV Pipe For Pitch to 40 deg, Steel, Galvanized, Black
Documents
- Roof flashing slides over DWV pipe for pitch to 40 deg
- Made of rust-proof, stamped 29 ga galvanized steel
- Non-fading sealing collars
- Approved for type "B" installations
- Not for hot-mopped or built-up roofs
- Do not use paint or petroleum based products on rubber collars
- Self sealing collar slides over pipe and requires no caulking
- Metal base for pitch from 0 to 40 deg or up to 10/12 roof
- Rated 180 deg F continuous heat and Approved for type "B" installations
- Standard/Approvals: IAPMO Listed|NES 653|PROP65: Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Oatey® No-Calk® Roof Flashing, Standard Base, 14-1/2 in Base Length, 11 in Base Width, 3 in Pipe, For Use With: Slides Over DWV Pipe For Pitch to 40 deg, Steel, Galvanized, Black
Oatey Galvanized Base No-Calk Roof Flashings can be used in commercial and residential applications where a watertight seal for roof penetrations around the plumbing vent pipe is required.
- Brand: Oatey®
Oatey®
Oatey® No-Calk® 11866 Standard Base Roof Flashing, Steel, 3 in Pipe, 11 in W x 14-1/2 in L Base
Oatey® No-Calk® Roof Flashing, Standard Base, 14-1/2 in Base Length, 11 in Base Width, 3 in Pipe, For Use With: Slides Over DWV Pipe For Pitch to 40 deg, Steel, Galvanized, Black