14544

Sioux Chief HydraRester™ 652-A 650 Water Hammer Arrester, 1/2 in, MNPT, 350 psi, Domestic
Water Hammer Arresters
MPN: 14544 3474267 MFG #: 652-A
19.36000 / ea

Tomahawk HydraRester™ Water Hammer Arrester, Series: 650, 1/2 in Nominal, MNPT, 350 psi, 250 deg F, Copper Body, EPDM O-Ring, 6-1/2 x 1-3/8 in, Domestic

Sioux Chief 650 Series piston-type water hammer arresters shall be required in piping systems. Water hammer arresters shall have sufficient volume of air to dissipate the calculated kinetic energy generated in the piping system. Arresters shall be effective when installed at any angle. Arresters shall be approved for installation with no access panel required. Water hammer arresters shall be ANSI/ASSE 1010 2004 certified. Arresters shall be sized and placed per manufacturer's instructions.

QTY
  • Features
  • Videos
  • Lifetime cycle tested at U.s. testing laboratories to withstand 10,000 shock cycles
  • Factory tested to withstand 500,000 cycles without failure (654-C tested)
  • HydraRester™ male sweat fittings are compatible with press-fitting systems, such as Viega ProPress™ and all push-fitting systems
  • Allows for installation in 2 x 4 wall cavity
  • 2900 psi burst tested
  • Type l copper tube, dow-corning 111 FDA approved silicone compound, no lead EcoBrass 69300 fitting
  • Standard/Approvals: ANSI/ASSE 1010 2004