Febco® 781289LL LF622UF Non Tapped Ball Valve, 1 in, Union Thread, Cast Copper Silicon Alloy Body, Full Port
Ball Valves
MPN: 1303563 4076483 MFG #: 781289LL
72.00000 / ea

Febco® Ball Valve, Non Tapped, Series: LF622UF, 1 in Nominal, Union Thread, 600 psi WOG, 0 to 350 deg F, 60 gpm, Full Port, Media: Water, Lever Actuator, Chrome Plated Brass Ball, 2-7/8 in Inlet to Outlet Length, 2 in Top to Inlet Center, Cast Copper Silicon Alloy Body, Brass Trim, PTFE Packing Seal

Series LF622UF Lead Free* Full Port Union End Ball Valves are designed for steam service applications. They are ideal for throttling and balancing of nonabrasive fluids where minimum flow is 20% to 100% of valve capacity. The full port design ensures minimal pressure drop. These valves feature a PTFE stem packing seal, thrust washer and seat. They are available with tapped outlets suitable for the installation of a pressure gauge or test cock. Maximum Working Pressure: 600psi (41.3 bar) WOG; 125psi (8.6 bar) WSP.

  • Features
  • The FEBCO Series LF622FT/LF622UFT available with tapped side outlet suitable for installation of pressure gauges or test cocks LF622UF/UFT with union ends
  • Lead free construction to comply with Lead free installation requirements
  • Tee handle standard on 1/2 in through 1-1/4 in sizes (15mm - 32mm)
  • Lever handle standard on 1-1/2 in through 2 in sizes (40 mm - 50 mm)
  • Full port design for low pressure drop
  • Pressure rated at 600 psi (41.4 bar) WOG, (non-shock) 1/2 to 2 in (15 mm to 50 mm) (DN15-DN50) and 125 psi (8.6 bar) saturated steam
  • Suitable for temperature from 0 to 350 deg F (-18 deg C to 177 deg C) at 50 psi (345 kPa)
  • PTFE stem packing seal, thrust washer and seat
  • Plated carbon steel handle with vinyl insulator
  • Quarter-turn open or close operation
  • Ideal for throttling and balancing applications of non-abrasive fluids where minimum flow is 20% to 100% of valve capacity
  • Low operating torque
  • Adjustable stem packing gland
  • Bottom loaded, pressure retaining stem
  • The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
  • Standard/Approvals: ISO 9001-2008