Bradford White® Defender Safety System® RG1PV50S6N TTW® Gas Water Heater, 40000 Btu/hr Heating, 50 gal Tank, Natural Gas Fuel, Power Vent, 43 gph at 90 deg F Recovery, Ultra Low NOx: No, Domestic

1241338 MFG #: RG1PV50S6N
$2,689.95 / ea

Bradford White® Defender Safety System® Gas Water Heater, Series: TTW® , 40000 Btu/hr Heating, Natural Gas, 1/2 in Gas Connection, 50 gal Tank, Pilot Ignition, Power Vent, 2 in, 3 in Vent, 43 gph at 90 deg F Recovery, Energy Factor: 0.63, 3/4 in NPT Water Connection, 150 psi, Ultra Low Nox: No, 26-3/4 in D x 58-1/4 in H, Domestic

Our Power Vent (TTW®) models are power vented for positive exhaust. They offer greater installation flexibility with the ability to vent through a wall or roof, with either 2 or 3 in PVC, ABS or CPVC pipe. They offer an increased amount of hot water available at a usable temperature in less time than normal.

QTY
  • Features
  • Bradford White® ICON System™ - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC)
  • Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials
  • Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels
  • Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting
  • Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall
  • Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations
  • Horizontal and vertical venting - PVC, ABS or CPVC
  • Advanced ScreenLok® technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater
  • Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber
  • Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions
  • Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner
  • Factory installed Hydrojet® total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank
  • Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, this formula (Vitraglas®) is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity
  • Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
  • Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
  • Low restriction brass drain valve - Durable tamper proof design
  • Protective magnesium rod
  • Standard/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR® Qualified
  • INCLUDES: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve
  • WARRANTY: 6 Years Limited Tank and Component Parts