1241286 MFG #: RE250S6-1NCWW
$1,604.95 / ea
  • ASME Yes/No: No
  • Dimensions: 22 in Dia x 47 in H
  • Domestic/Import: Domestic
  • Energy Factor: 0.92
  • Heating Element: Screw-In Copper
  • Material: Steel
  • Phase: 1
  • Power Rating: 4.5
  • Pressure Rating: 150
  • Recovery Rate: 21
  • Series: RE250S6
  • Tall or Short: Short
  • Tank Capacity: 50
  • Type: Upright
  • Voltage Rating: 208
  • Water Connection: 3/4 in NPT

Bradford White® Electric Water Heater, Upright, Series: RE250S6, 50 gal Tank, 208/240 VAC, 3500 W at 208 VAC/4500 W at 240 VAC, 1 ph, 3/4 in NPT Water Connection, Screw-In Copper Heating Element, 0.92 Energy Factor, 21 gph at 90 deg F Rise Recovery, 150 psi, Tall or Short: Short, ASME Yes/No: No, Steel, 22 in Dia x 47 in H, Domestic

Our line of upright electric models features the power of the Hydrojet® Total Performance System and the convenience of electricity. Available in single and double element models, these water heaters give you the power you need to heat water with electricity.

  • Features
  • Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety
  • Low restrictive brass drain valve - Durable tamper proof design
  • Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water
  • Screw-in style element
  • Factory installed hydrojet® total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
  • Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
  • Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity
  • Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
  • Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
  • Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service
  • Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency
  • Non-simultaneous operation
  • Standard/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NAECA Compliant, NSF 372, UL 174 Certified
  • INCLUDES: 2 in THK Insulation Blanket and Temperature and Pressure Relief Valve
  • WARRANTY: 6 Years