Bradford White® RE240L6-1NCWW Lowboy Electric Water Heater, 38 gal Tank, 208/240 VAC, 3500 W at 208 VAC/4500 W at 240 VAC, 1 ph

1241279 MFG #: RE240L6-1NCWW
$1,694.95 / ea
Bradford White® RE240L6-1NCWW Lowboy Electric Water Heater, 38 gal Tank, 208/240 VAC, 3500 W at 208 VAC/4500 W at 240 VAC, 1 ph
  • ASME Yes/No: No
  • Dimensions: 24 in Dia x 33.622 in H
  • Domestic/Import: Domestic
  • Energy Factor: 0.91
  • Heating Element: Screw-In Copper
  • Material: Steel
  • Phase: 1
  • Power Rating: 4.5
  • Pressure Rating: 150
  • Recovery Rate: 21
  • Series: RE240L6
  • Tank Capacity: 38
  • Type: Lowboy
  • Voltage Rating: 208
  • Water Connection: 3/4 in NPT

Bradford White® Electric Water Heater, Lowboy, Series: RE240L6, 38 gal Tank, 208/240 VAC, 3500 W at 208 VAC/4500 W at 240 VAC, 1 ph, 3/4 in NPT Water Connection, Screw-In Copper Heating Element, 0.95 Energy Factor, 21 gph at 90 deg F Rise Recovery, 150 psi, ASME Yes/No: No, Steel, 854 mm H

Residential Electric models, with their varied configurations, fit just about any location. Built for tight spaces with low headroom, Lowboy models allow you flexibility to put electric water heating where a conventional upright tank will not fit. Bradford White offers models with and without insulation blankets.

QTY
Add to List
  • Features
  • Low restriction brass drain valve - Durable tamper proof design
  • Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety
  • Direct heat transfer with a single immersed element - Transfers heat directly and efficiently to the water
  • Factory installed hydrojet® total performance system - sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank
  • Vitraglas® lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water
  • Vitraglas® is fused to the steel surface by firing at a temperature of over 1600 deg F
  • Insulation system - Non-CFC foam covers the sides and top of the tank, reducing the amount of heat loss
  • Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections
  • Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation
  • Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service
  • Design evaluated by ETL in accordance with part 280.707(d) of HUD mobile home construction and safety standards for energy efficiency
  • Non-simultaneous operation - Non-simultaneous operation indicates only one heating element will operate at a time and is standard construction from the factory
  • Standard/Approvals: AHRI Certified, CSA Certified, ETL Listed
  • INCLUDES: Temperature and Pressure Relief Valve
  • WARRANTY: 6 or 10 Years Limited