Uponor Ecoflex® 5216920 Single Potable Pipe, 2 in PEX, 1.93 in THK Wall, R Factor 9.5, Polyethylene
Uponor Ecoflex® Potable Pipe, Single, 2 in PEX Nominal, 1.629 in Inside Dia, 2-1/8 in Outside Dia, 1.93 in Wall Thickness, 0.25 Btu-in/hr-sq-ft-deg F, 9.5, 73 to 200 deg F, Polyethylene
Documents
- Corrugated, seamless high-density polyethylene (HDPE), UV-protected jacket
- Multilayered, closed-cell, crosslinked polyethylene (PEX) foam insulation
- 0.1 g/100 sq in/day vapour permeability
- 18 in bend radius
- Install Ecoflex potable PEX single in hot or cold potable-water applications
- Join pipes using Uponor ProPEX® or WIPEXTM fittings
- Ecoflex end caps are required on all exposed ends of Ecoflex pipes to avoid ground water contamination
- Crosslinked polyethylene material
- SDR-9 engel method of manufacture
- Use ProPEX fittings up to 3 in or WIPEX fittings for the whole range
- Standard/Approvals: ASTM F876/F877/F1960/ F2023|AWWA C904|CSA B137.5|cNSFus-pw|NSF/ANSI 14/61|PEX 5106|U.P. Code
- INCLUDES: 6.9 in Jacket, 300 ft Coil
Uponor Ecoflex® Potable Pipe, Single, 2 in PEX Nominal, 1.629 in Inside Dia, 2-1/8 in Outside Dia, 1.93 in Wall Thickness, 0.25 Btu-in/hr-sq-ft-deg F, 9.5, 73 to 200 deg F, Polyethylene
Ecoflex potable PEX single pipes are designed for potable-water distribution applications. The Uponor AquaPEX service pipes in Ecoflex potable PEX piping are manufactured by the Engel-method (PEX-a) process and are listed to ASTM F876 and F877. The pipe is surrounded by multi-layer, closed-cell, PEX-foam insulation and a water-resistant, corrugated HDPE jacket, making it ideal for direct-burial applications.
- Brand: UponorInside Diameter: 1.629Material: PolyethyleneNominal Size: 2 in PEXOutside Diameter: 2-1/8R Factor: 9.5Temperature Rating: 73 to 200Thermal Conductivity: 0.25Type: SingleWall Thickness: 1.93
Uponor Ecoflex® 5216920 Single Potable Pipe, 2 in PEX, 1.93 in THK Wall, R Factor 9.5, Polyethylene
Uponor Ecoflex® Potable Pipe, Single, 2 in PEX Nominal, 1.629 in Inside Dia, 2-1/8 in Outside Dia, 1.93 in Wall Thickness, 0.25 Btu-in/hr-sq-ft-deg F, 9.5, 73 to 200 deg F, Polyethylene