WATTS® 0792076 Dual Check Valve, 3/8 in Nominal, FNPT End Style, Low Lead Compliance: Yes, Cast Copper Silicon Alloy Body, Import
WATTS® Dual Check Valve, 3/8 in Nominal, FNPT, 150 psi, 33 to 180 deg F, Low Lead Compliance: Yes, Media: Water, 2-7/8 in Inlet to Outlet Length, Cast Copper Silicon Alloy Body, Silicone Disc/Stainless Steel Spring Trim, Buna-N® Seal, 1-1/4 in H, Import
- No special tools are required for servicing
- Short lay length
- Can be installed in the vertical or horizontal position
- Can be installed in many piping configurations and with a wide range of meter horns, copper setters and meter boxes
- Temperature range is 33 to 180 deg F (0.5 to 82 deg C) continuous
- Standard/Approvals: ARRA 2009|ASSE 1024|BAA 1933|CSA B64.6|FM Approved|NSF Approved|UL Listed|ULC Listed|USC Certified | PROP65: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm.
- WARRANTY: 1 year Limited
WATTS® Dual Check Valve, 3/8 in Nominal, FNPT, 150 psi, 33 to 180 deg F, Low Lead Compliance: Yes, Media: Water, 2-7/8 in Inlet to Outlet Length, Cast Copper Silicon Alloy Body, Silicone Disc/Stainless Steel Spring Trim, Buna-N® Seal, 1-1/4 in H, Import
Series LF7 Lead Free Dual Check Valves prevent the reverse flow of polluted water from entering into the drinking water supply at the service entrance or at individual outlets. It consists of a Lead Free cast copper silicon alloy body construction, with two plastic replaceable check valves, and stainless steel springs. Series LF7 is designed for non-health hazard residential water system containment, continuous pressure applications. It is installed immediately downstream of the residential water meter, in a vertical or horizontal position. Check with local inspection authorities for installation requirements. Minimum Working Pressure: 10psi (69 kpa) Maximum Working Pressure: 150psi (10 bar).
- Brand: WATTS®Body Material: Cast Copper Silicon AlloyDimensions: 1-1/4 in HDomestic/Import: ImportEnd Style: FNPTInlet to Outlet Length: 2-7/8Low Lead Compliance: YesMedia: WaterNominal Size: 3/8Pressure Rating: 150Series: LF7Softgoods Material: Buna-N® SealTemperature Rating: 33 to 180Trim Material: Silicone Disc/Stainless Steel Spring
WATTS® 0792076 Dual Check Valve, 3/8 in Nominal, FNPT End Style, Low Lead Compliance: Yes, Cast Copper Silicon Alloy Body, Import
WATTS® Dual Check Valve, 3/8 in Nominal, FNPT, 150 psi, 33 to 180 deg F, Low Lead Compliance: Yes, Media: Water, 2-7/8 in Inlet to Outlet Length, Cast Copper Silicon Alloy Body, Silicone Disc/Stainless Steel Spring Trim, Buna-N® Seal, 1-1/4 in H, Import