Maxitrol® 325-7AL-1-1/4 Lever Acting Design Line Regulator, 1-1/4 in, Thread, 2 psi, Aluminum Body
Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1-1/4 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 8 in Inlet to Outlet Length, Aluminum Body, 7.3 in H
- Suitable for multi-positional mounting, If ball check vent limiting device is installed, mount in an upright position only
- Note: capacities are used to determine the maximum multiple appliance load, the largest single appliance served by the regulator should not exceed the maximum individual load specified above
- Minimum Regulation: Suitable for pilot flow applications
- 65 psi emergency exposure limit (inlet side only)
- 1/2 in NPT vent connection
- 6.1 in swing radius
- Maximum Individual Load: 1250000 Btu/hr
- Total load of multiple appliance combined capacity: 1250000 Btu/hr
- 7 to 11 in wc, 1.7 to 2.7 kPa at 2 psi (white CSA certified springs)
- Standard/Approvals: ANSI Z21.80|CSA 6.22 Certified Line Pressure Regulators
Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1-1/4 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 8 in Inlet to Outlet Length, Aluminum Body, 7.3 in H
Maxitrol's 325-L Series line pressure regulators are for 2 psi piping systems. 325 Series regulators are for use on residential, commercial, and industrial applications. The 325 Series features a high leverage linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. 325 Series regulators are for 2 psi and 5 psi piping systems. Models available for appliance main burner or pilot applications and as line pressure regulators.
- Brand: Maxitrol®
Maxitrol® 325-7AL-1-1/4 Lever Acting Design Line Regulator, 1-1/4 in, Thread, 2 psi, Aluminum Body
Maxitrol® Line Regulator, Lever Acting Design, Series: 325, 1-1/4 in Nominal Size, Thread, 2 psi, -40 to 205 deg F, 8 in Inlet to Outlet Length, Aluminum Body, 7.3 in H