Boshart Industries Relief Valve, Lead Free Standard, Series: SSRVN Series, 3/4 x 1/2 in Nominal, MNPT x FNPT End Style, 75 psi Pressure, 248 deg F, Media: Cold Water, Spring Actuator, 1.2 in Inlet to Outlet Length, 0.94 in Top to Inlet Center, 304 Stainless Steel Body, NBR/304 Stainless Steel Trim, PTFE Softgoods, 2.45 in L x 0.94 in W, Import

Boshart Industries relief valves are recommended for all cold water system installations to protect against damage to piping and pressure tanks. Field adjustments are not recommended for these relief valves. Any changes made to the pre-set pressure is entirely at the risk of the person(s)/company who make the adjustment. Relief valves must be installed so that they drain to a floor drain, sump or other safe location with an air break. If an outlet pipe is used then it must be at least the same diameter as the relief valve outlet.