Liberty Pumps® 405, 54 gpm Flow Rate, 2 in FNPT Inlet x 2 in FNPT Outlet, 1 Phase , 1/2 hp, Polypropylene
Liberty Pumps®, 405, High Temperature Fully Automatic, Series: 405, 54 gpm Flow Rate, 2 in FNPT Inlet, 2 in FNPT Outlet, 34 ft Maximum Head, 1/2 hp, 115 VAC, 7.3 A, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTOOW 10 ft Cord, Vortex High Temperature Engineered Polymer Impeller, 180 deg Continuous, Sealed Bearing, Polypropylene, 13-3/4 in W x 14-1/8 in H Dimensions
- Pre-assembled and ready to install
- Separate access cover for easy switch inspection
- Integrally molded rubber gasket for a superior gastight seal
- QuickTree® technology allows quick inspection and removal of float switch without disconnecting the plumbing
- Oil filled, hermetically sealed motor with thermal overload protection, 10 ft three wire power cord with grounded plug
- Corrosion-resistant polyolefin basin with molded in connections
- Maintenance-free, permanently lubricated sealed bearings
- 3/8 in solid handling
- Standard and Wi-Fi alarmed models available
- Standard/Approvals: cCSAus Certified|SSPMA Certified|PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- INCLUDES: Piggyback Style Plug
- WARRANTY: 3 Years Limited
Liberty Pumps®, 405, High Temperature Fully Automatic, Series: 405, 54 gpm Flow Rate, 2 in FNPT Inlet, 2 in FNPT Outlet, 34 ft Maximum Head, 1/2 hp, 115 VAC, 7.3 A, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTOOW 10 ft Cord, Vortex High Temperature Engineered Polymer Impeller, 180 deg Continuous, Sealed Bearing, Polypropylene, 13-3/4 in W x 14-1/8 in H Dimensions
Liberty's 405 is a specially designed commercial Drain Pump built to perform in high-head, high temperature situations. QuickTree® technology provides a separate access cover for easy switch inspection. For gray wastewater applications, the 405 is perfect for laundry trays, multi-compartment sinks, bar sinks, utility sinks, dishwashers and allows you the freedom to install fixtures where gravity drain lines are not available. The system arrives fully assembled and ready to install.
- Brand: Liberty Pumps®Amperage Rating: 7.3Bearing Type: SealedCord Type: SJTOOW 10 ftDimensions: 13-3/4 in W x 14-1/8 in HFlow Rate: 54Frequency Rating: 60Horsepower: 1/2Impeller Type: Vortex High Temperature Engineered PolymerInlet Size: 2 in FNPTMaterial: PolypropyleneMaximum Head: 34Motor Speed: 3450Outlet Size: 2 in FNPTSeries: 405Temperature Rating: 180 deg ContinuousType: High Temperature Fully AutomaticVoltage Rating: 115Phase: 1
Liberty Pumps® 405, 54 gpm Flow Rate, 2 in FNPT Inlet x 2 in FNPT Outlet, 1 Phase , 1/2 hp, Polypropylene
Liberty Pumps®, 405, High Temperature Fully Automatic, Series: 405, 54 gpm Flow Rate, 2 in FNPT Inlet, 2 in FNPT Outlet, 34 ft Maximum Head, 1/2 hp, 115 VAC, 7.3 A, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTOOW 10 ft Cord, Vortex High Temperature Engineered Polymer Impeller, 180 deg Continuous, Sealed Bearing, Polypropylene, 13-3/4 in W x 14-1/8 in H Dimensions