Zoeller® 53-0002 Mighty-Mate 50 Single Phase Single Seal Non-Automatic Submersible Pump With Single Seal, 43 gpm, 1-1/2 in NPT Outlet, 3/10 hp, Cast Iron, Domestic
- Amperage Rating: 9.7
- Bearing Type: Sleeve
- Cord Type: 3-Wire
- Dimensions: 10-3/32 in W x 10-1/16 in H
- Domestic/Import: Domestic
- Enclosure Type: Auto Reset Thermal Overload
- Flow Rate: 43
- Frequency Rating: 60
- Horsepower: 3/10
- Impeller Type: Non-Clogging Vortex
- Material: Cast Iron
- Maximum Head: 19-1/4
- Motor Speed: 1550
- Outlet Size: 1-1/2 in NPT
- Series: Mighty-Mate 50
- Temperature Rating: 130
- Type: Single Seal Non-Automatic
- Voltage Rating: 115
- Phase: 1
Zoeller® Submersible Pump, Single Phase Single Seal Non-Automatic, Series: Mighty-Mate 50, 43 gpm, 1-1/2 in NPT Outlet, 19-1/4 ft Maximum Head, 3/10 hp, 115 VAC, 9.7 A, 60 Hz, 1550 rpm Motor, 3-Wire Cord, Non-Clogging Vortex Impeller, 130 deg F, Auto Reset Thermal Overload, Sleeve Bearing, Cast Iron, 10-3/32 in W x 10-1/16 in H, Domestic
Considered one of America's most popular sump pumps. This robust family of sump pumps is known for reliability, durability and performance. The preset, integral snap-action float switch is engineered for one million mechanical starts. The heat-dissipating cast iron body with powder coated epoxy finish provides maximum pumping performance under the most extreme conditions. With Zoeller's cool run design, the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.
- Features
- Float-operated, submersible, 2-pole mechanical switch and variable level, long-cycle systems available
- Corrosion-resistant, powder coated epoxy finish
- No steel sheet metal parts to rust or corrode
- Stainless steel screws, guard, handle and switch arm
- No screens to clog
- Watertight, neoprene square ring between motor and pump housing
- Solid, buoyant, polypropylene float
- Oil-filled, hermetically-sealed, automatic reset thermal overload protected motor
- Upper and lower sleeve bearings running in bath of oil
- Entire unit pressure-tested after assembly
- Carbon and ceramic shaft seal
- Passes 1/2 in spherical solids
- Watertight and dust-tight
- Permanently oiled bearings
- 7-1/4 in on point, 3 in off point
- Cast iron switch case, motor and pump housing
- Engineered thermoplastic base
- Engineered, glass-filled, plastic impeller with metal insert
- Stainless steel guard and handle
- Lower and upper bearings, oil-fed cast iron
- Standard/Approvals: CSA Certified|SSPMA Standard|UL Listed
- INCLUDES: Stainless Steel Handle and 15 ft Cord with Plug
- WARRANTY: Limited