Liberty Pumps® PRG102A PRG, 44 gpm Max Flow, 30 ft Rated Head, Automatic, 50 ft Max Head, 230 VAC, 1 Phase
Liberty Pumps®, PRG102A, 1-Stage, Series: PRG, 44 gpm Maximum, 30 ft Rated Head, Automatic/Non Automatic: Automatic, 2 in FNPT Outlet, 50 ft Maximum Head, 1 hp, 230 VAC, 6 A Full Load/23.7 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTW 10 ft Cord, 1 Service Factor, Cast Iron Impeller, 221 deg F Thermal Overload, Upper Ball/Lower Ball Bearing
- Higher flow rates allow use with 2 in discharge lines
- Heavy cast iron construction
- Hardened stainless steel cutter and plate
- Oil filled, thermally protected motor
- Unitized silicon carbide shaft seal
- Quick connect 10 ft power cord
- Patented V-Slice® cutter technology
- PRG Series grinders can be used as a replacement pump in 2 in discharge systems using LE40 and LE50 Series solids handling pumps
- PRG Series flow rates do not exactly match LE Series flow rates, consult factory with actual application and head specifications prior to replacing LE40 and LE50 Series pumps
- Shreds difficult solds that can jam a solids-handling style pump
- Standard/Approvals: CSA Certified|SSPMA Certified|PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
- WARRANTY: 3 Years
Liberty Pumps®, PRG102A, 1-Stage, Series: PRG, 44 gpm Maximum, 30 ft Rated Head, Automatic/Non Automatic: Automatic, 2 in FNPT Outlet, 50 ft Maximum Head, 1 hp, 230 VAC, 6 A Full Load/23.7 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTW 10 ft Cord, 1 Service Factor, Cast Iron Impeller, 221 deg F Thermal Overload, Upper Ball/Lower Ball Bearing
Designed for sewage applications. Higher flow rates allow use with 2 in discharge lines. Operates on standard 115 or 230 V 20 A circuits.
- Brand: Liberty Pumps®
Liberty Pumps® PRG102A PRG, 44 gpm Max Flow, 30 ft Rated Head, Automatic, 50 ft Max Head, 230 VAC, 1 Phase
Liberty Pumps®, PRG102A, 1-Stage, Series: PRG, 44 gpm Maximum, 30 ft Rated Head, Automatic/Non Automatic: Automatic, 2 in FNPT Outlet, 50 ft Maximum Head, 1 hp, 230 VAC, 6 A Full Load/23.7 A Locked Rotor, 60 Hz Frequency, 1 ph, 3450 rpm Motor, SJTW 10 ft Cord, 1 Service Factor, Cast Iron Impeller, 221 deg F Thermal Overload, Upper Ball/Lower Ball Bearing