Zoeller® 153-0005 High Head Dose-Mate 150 1-Phase Single Seal Effluent Pump, 77 gpm Maximum, Automatic, 44 ft Maximum Head, 115 VAC

915214 MFG #: 153-0005
$733.00 / ea
Zoeller® 153-0005 High Head Dose-Mate 150 1-Phase Single Seal Effluent Pump, 77 gpm Maximum, Automatic, 44 ft Maximum Head, 115 VAC
  • Amperage Rating: 10.5
  • Automatic/Non Automatic: Automatic
  • Bearing Type: Upper Sleeve/Lower Ball
  • Dimensions: 12-1/8 in H
  • Frequency Rating: 60
  • Horsepower: 1/2
  • Impeller Type: Engineered Thermoplastic Non-Clogging Vortex
  • Material: Cast Iron
  • Maximum Flow Rate: 77
  • Maximum Head: 44
  • Motor Speed: 3450
  • Outlet Size: 1-1/2 in NPT
  • Series: High Head Dose-Mate 150
  • Temperature Rating: 130
  • Type: Single Seal
  • Voltage Rating: 115
  • Phase: 1

Zoeller® Effluent Pump, 1-Phase Single Seal, Series: High Head Dose-Mate 150, 77 gpm Maximum Flow Rate, Automatic Automatic/Non Automatic, 1-1/2 in NPT Outlet, 44 ft Maximum Head, 1/2 hp, 115 VAC, 10.5 A, 60 Hz, 3450 rpm Motor, Engineered Thermoplastic Non-Clog Vortex Impeller, 130 deg F, Sleeve Upper/Ball Lower Bearing, Cast Iron, 12-1/8 in H

This is our fastest growing line of effluent pumps. The 150 series is truly a workhorse designed for reliability under extreme conditions in an effluent environment. 150 series pump curves cover a wide range of applications. They are well suited to applications with low pressure pipe (LPP) and enhanced flow STEP systems. Zoeller's cool run design and corrosion resistant, powder coated epoxy finish, in addition to the hermetically sealed, oil-filled motor and non-clogging vortex impeller add up to a long-lasting, trouble-free product.

QTY
Add to List
  • Features
  • Corrosion resistant, powder coated epoxy finish
  • Stainless steel lifting handle
  • Assembled with stainless steel bolts
  • 4/10 hp, passes 3/4 in spherical solids
  • Oil-filled, hermetically-sealed, automatic reset thermal overload protected
  • Carbon/ceramic seals
  • Upper sleeve bearing and lower ball bearing running in a bath of oil
  • 20 ft, UL listed power cord with molded, 3-wire plug
  • 1-1/2 in NPT vertical discharge
  • For septic tank, low pressure pipe (LPP) and enhanced flow STEP systems
  • Over 130 deg F special quotation required
  • Standard/Approvals: cCSAus Certified, SSPMA Standard, UL Listed
  • INCLUDES: 20 ft Piggyback Variable Level Pump Switch