LIBERTY FL72M 3/4HP SINGLE PHASE 2" OUTLET 208-230V EFFLUANT PUMP 10' CORD

1289733 MFG #: FL72M
$1,171.00 / ea
LIBERTY FL72M 3/4HP SINGLE PHASE 2" OUTLET 208-230V EFFLUANT PUMP 10' CORD
  • Amperage Rating: 10.5 A Full Load/24.1 A Locked Rotor
  • Automatic/Non Automatic: Non-Automatic
  • Bearing Type: Ball/Race
  • Cord Type: SJTW 10 ft
  • Dimensions: 11.2 in W x 7 in D x 16.4 in H
  • Enclosure Type: NEMA 1/4X
  • Frequency Rating: 60
  • Horsepower: 3/4
  • Impeller Type: Cast Iron Multi-Vane Semi-Open
  • Material: Cast Iron
  • Maximum Flow Rate: 100
  • Maximum Head: 77
  • Motor Speed: 3450
  • Outlet Size: 1-1/2 in FNPT
  • Rated Head: 15
  • Series: FL70
  • Temperature Rating: 248 deg F Thermal Overload
  • Type: Mid-Range Head
  • Voltage Rating: 208 to 230
  • Phase: 1

Liberty Pumps® Submersible Effluent Pump, 1-Phase Mid-Range Head, Series: FL70, 87 gpm Maximum Flow Rate, 15 ft Rated Head, Automatic/Non Automatic: Non-Automatic, 1-1/2 in and 2 in FNPT Outlet, 77 ft Maximum Head, 3/4 hp, 208 to 230 VAC, 10.5 FLA/24.1 A Locked Rotor, 60 Hz, 3450 rpm Motor, 10 ft SJTW Cord, Cast Iron Multi-Vane Semi-Open Impeller, 248 deg F Thermal Overload, NEMA 4X Outdoor/NEMA 1 Indoor Enclosure, Ball/Race Bearing, Heavy Cast Iron, 11.2 in W x 7 in D x 16.4 in H,

QTY
Add to List
  • Features
  • Videos
  • 3/4 in solids handling
  • Semi-open impellers permit passage of solids without clogging
  • Stainless steel fasteners
  • Quick-disconnect power cord
  • 416 stainless steel rotor shaft
  • Permanently lubricated upper and lower ball bearings
  • Oil-filled, hermetically sealed motors with thermal overload protection
  • Unitized carbon and ceramic shaft seal
  • Class B stator winding
  • 140 deg F maximum fluid
  • Manual operation
  • Standard/Approvals: cCSAus Certified, SSPMA Certified, PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birthdefects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.