LIBERTY FL63M-2 6/10HP SUBMERSIBLE SUMP PUMP MANUAL PUMP 208-230V 3PH 2" DISCHARGE 3/4" SOLIDS HANDLING C

1208514 MFG #: FL63M-2
$1,064.00 / ea
  • Amperage Rating: 5.6 A Full Load/25.3 A Locked Rotor
  • Automatic/Non Automatic: Non-Automatic
  • Bearing Type: Ball/Race
  • Cord Type: SEOOW 25 ft
  • Dimensions: 11.2 in W x 7 in D x 16.4 in H
  • Enclosure Type: NEMA 1/4X
  • Frequency Rating: 60
  • Horsepower: 6/10
  • Impeller Type: Cast Iron Multi-Vane Semi-Open
  • Material: Cast Iron
  • Maximum Flow Rate: 100
  • Motor Speed: 3450
  • Outlet Size: 1-1/2 in FNPT
  • Rated Head: 15
  • Series: FL60
  • Temperature Rating: 248 deg F Thermal Overload
  • Type: Mid-Range Head
  • Voltage Rating: 208 to 230
  • Phase: 3

Liberty Pumps® Submersible Effluent Pump, Mid-Range Head, Series: FL60, 85 gpm Maximum, 15 ft, Non-Automatic, 1-1/2 in and 2 in FNPT Outlet, 6/10 hp, 208/230 VAC, 5.6 FLA/25.3 A Locked Rotor, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, SEOOW 25 ft Cord, Cast Iron Multi-Vane Semi-Open Impeller, 248 deg F Thermal Overload, NEMA 4X Outdoor/NEMA 1 Indoor Enclosure, Ball/Race Bearing, Heavy Cast Iron, 11.2 in W x 7 in D x 16.4 in H Dimensions,

QTY
  • Features
  • Videos
  • 3/4 in solid handling
  • Semi-open impellers permit passage of solids without clogging
  • Stainless steel fasteners
  • 416 stainless steel rotor shaft
  • Permanently lubricated upper and lower ball bearings
  • 10 ft quick-disconnect power cord
  • Oil filled, hermetically sealed motors with thermal overload protection
  • Unitized carbon and ceramic shaft seal
  • 140 deg F fluid temperature
  • Class B stator winding
  • Manual operation
  • Standard/Approvals: cCSAus Certified|SSPMA Certified|PROP65: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov
  • WARRANTY: 3 Years