PPP® Prime-Pro™ PRO1-500 In-line Trap Primer Valve, 1/2 in Pipe, FNPT, Brass, Domestic

PPP® Prime-Pro™ Trap Primer Valve, In-line, 1/2 in Pipe, FNPT, For Use With: Fresh Water Distribution System, Brass, 2-7/8 in W x 3-1/4 in H, Domestic

The Prime-Pro™ is activated when sensing potable water flowing at an adjacent plumbing fixture. This trap priming device must be installed on the cold water line leading to the plumbing fixture; the valve then emits fresh cold potable water to a floor drain trap as long as the fixture is in use, providing an adequate trap seal. The Prime-Pro™ trap primer is equipped with vacuum breaker ports and internal back-flow protection to prevent cross connection. The valve is factory pre-set and 100% function tested prior to being labeled and boxed. The Prime-Pro™ trap priming valve is designed for 1 to 4 floor drain trap seal applications. The valve is activated at a minimum flow rate of 0.5 GPM at 20 psig. This product has been third party tested and meets the requirements of ASSE Standard 1018.