PPP® SWA-750B Sweat-On Water Hammer Arrester, 3/4 in, C, 0 to 80 psig, 12 to 32 Fixture Unit Capacity, Domestic
PPP® Water Hammer Arrester, Sweat-On, 3/4 in Nominal, C x C, 0 to 80 psig, 12 to 32 Fixture Unit Capacity, 40 to 212 deg F, Copper Body, EPDM O-Ring, 9-7/16 in OAL, Domestic
- Least expensive to install
- Designed to solder in standard copper elbows and tees
- Suitable for all potable water applications
- Requires no maintenance
- Sized in accordance with service pipe dimensions
- Maintenance free and piston is the only moving part
- The only moving part is the free-moving piston furnished with O-ring seals which have been tested for reliability in excess of normal operating ranges
- Machined of C96300 lead free brass adaptor
- Copper or free turning brass cap
- Nickel plated for salt water application
- 60 psi preload nitrogen
- Standard/Approvals: ASSE 1010|Listed by Recognized National Standards|UPC Listed|PROP65: Cancer and Reproductive harm www.p65warnings.ca.gov
PPP® Water Hammer Arrester, Sweat-On, 3/4 in Nominal, C x C, 0 to 80 psig, 12 to 32 Fixture Unit Capacity, 40 to 212 deg F, Copper Body, EPDM O-Ring, 9-7/16 in OAL, Domestic
Precision Plumbing Products is again the first to offer a complete series, 1/2 in through 2 in sweat on, water hammer Arrester. All Arresters meet and/or exceed performance requirements as set forth by the ASSE standard 1010. The sweat on Arrester will provide a maintenance free installation when installed in accordance with the manufacturers recommendations.
- Brand: PPP®Body Material: CopperDimensions: 9-7/16 in OALDomestic/Import: DomesticEnd Style: C x CNominal Size: 3/4Pressure Rating: 0 to 80Softgoods Material: EPDM O-RingTemperature Rating: 40 to 212Type: Sweat-On
PPP® SWA-750B Sweat-On Water Hammer Arrester, 3/4 in, C, 0 to 80 psig, 12 to 32 Fixture Unit Capacity, Domestic
PPP® Water Hammer Arrester, Sweat-On, 3/4 in Nominal, C x C, 0 to 80 psig, 12 to 32 Fixture Unit Capacity, 40 to 212 deg F, Copper Body, EPDM O-Ring, 9-7/16 in OAL, Domestic