Romac®

Romac® CL1-7.24x12 Repair Clamp With Cast Lug, 6 in Pipe, Stainless Steel, Domestic

204585 MFG #: CL1-7.24x12
$421.76 / ea
Romac® CL1-7.24x12 Repair Clamp With Cast Lug, 6 in Pipe, Stainless Steel, Domestic

Romac® Repair Clamp, Series: CL1, 6 in Pipe, 6.84 to 7.24 in Outside Dia, Stainless Steel, Grade 304, 12 in L, Domestic

Full circumferential, single section cast lug repair clamp (available with tapped outlet). Manufactured in the U.S.A.

QTY
Add to List
  • Features
  • Provides full circumferential repair of splits and holes
  • Recommended for use on steel cast iron, asbestos cement, plastic and other types of pipe
  • 304 stainless steel per ASTM a 240 stainless steel shell
  • The lugs are cast from ductile (nodular) iron
  • High strength low alloy steel track head bolts
  • National coarse rolled thread and heavy hex nuts
  • Heavy gauge 304 stainless steel armor per ASTM a 240, bonded to gasket to bridge gap at lug area
  • Gasket: virgin SBR rubber compounded for water and sewer service in accordance with ASTM D 2000 MAA 610
  • E-coat epoxy, electro coated and heat cured lug
  • ANSI/AWWA C230 stainless steel full-encirclement repair and service connection clamps 2 to 12 in
  • Lugs are removable
  • For higher working pressures, clamp length should equal or exceed diameter of pipe
  • Clamps are not to be used for joining plain end pipe
  • 150 psi
  • Standard/Approvals: ASTM A 240 Shell|ASTM A 536 Lug|ASTM D 2000 MAA 610 Gasket|AWWA 111 Bolts/Nut|AWWA C230|NSF Approved