WATTS® 0559100 LF1170 Temperature Control Valve, 1/2 in, Union Solder, 150 psi, 0.5 gpm, Copper Silicon Alloy Body

1155217 MFG #: 0559100
$484.00 / ea
WATTS® 0559100 LF1170 Temperature Control Valve, 1/2 in, Union Solder, 150 psi, 0.5 gpm, Copper Silicon Alloy Body
  • Body Material: Copper Silicon Alloy
  • Dimensions: 4-13/16 in W x 5-3/8 in H
  • Domestic/Import: Domestic
  • End Style: Solder Union
  • Flow Rate: 0.5
  • Media: Water
  • Nominal Size: 1/2
  • Pressure Rating: 150
  • Series: LF1170M2-US
  • Softgoods Material: EPDM O-Ring
  • Temperature Rating: 200
  • Trim Material: Stainless Steel

WATTS® Temperature Control Valve, Series: LF1170, 1/2 in Nominal, Union Solder, 150 psi, 200 deg F, 0.5 gpm, Media: Water, Copper Silicon Alloy Body, Stainless Steel Trim, EPDM O-Ring, 4-13/16 in W x 5-3/8 in H

This lead free hot water control valve, 1/2 in, is designed for installation on water heating equipment to provide tempered water to point-of-use fixtures and is ideal for radiant heat applications. The double throttling design combines hot and cold water control for a sensitive response to water temperature changes in the mixing chamber. It consists of a lead free cast copper silicon alloy, solder union connections, integral filter washers and check valves, solid wax hydraulic principle thermostat, virtual shutoff upon loss of cold water supply and a locking mechanism for the temperature setting. The maximum pressure is 150 psi. The adjustable field range temperature is 90 to 160 deg F.

QTY
Add to List
  • Features
  • Thermal actuation technology for precise temperature control
  • Integral filter washers and check valves
  • Solid wax hydraulic principle thermostat assures dependable mixing of hot and cold water
  • Copper thermostat controls both hot and cold water
  • Adjustment cap with locking feature
  • The wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight
  • 30 psi static minimum supply pressure
  • 120 to 200 deg F hot inlet and 40 to 85 deg F cold inlet temperature
  • 5 deg F above set point hot water inlet to outlet differential temperature
  • Accurate within +/- 3 deg F temperature out
  • 25% maximum pressure differential between hot and cold water supplies
  • 3-1/8 in top to inlet
  • 90 to 160 deg F temperature out
  • Polysulfone piston
  • Standard/Approvals: ASSE 1017/1069/1070, CSA B125, cUPC/IAPMO listed and UPC listed