Sioux Chief 524-10C Metal Hanger Strip, 10 ft L x 3/4 in W, Copper Plated, Domestic

4800 MFG #: 524-10C
$4.56 / ea
  • Brand: Tomahawk
  • Domestic/Import: Domestic
  • Finish: Copper Plated
  • Gauge: 24 ga Steel
  • Length: 10 ft
  • Manufacturer: Sioux Chief
  • material: 24 ga
  • Series: 524
  • Width: 3/4 in

Tomahawk Metal Hanger Strip, Series: 524, 10 ft Length, 3/4 in Width, 24 ga Steel, 24 ga, Copper Plated, Domestic

Sioux Chief metal hanger strap shall be used where necessary to support CTS, IPS or DWV pipe. Metal strap shall be made with galvanized or copper-plated steel and installed in accordance with national codes pertaining to hanger spacing and slope requirements. Metal hanger strap shall feature 1/4 in or 3/16 in pre-drilled pilot holes in alternating pattern and strap shall be 3/4 in wide.

Pack: 50/CS
QTY
  • Features
  • Installation: wear gloves and eye protection when handling metal hanger strap to avoid injury
  • Cut hanger strap to desired L, using approved hardware (not provided), secure hanger strap with nail or screw to joist or stub member
  • Hanger strap may be looped or double wrapped around piping and may be installed on same side or opposite side of floor joist or stub member
  • 750 lb maximum load rating
  • 250 degree F safe working temperature
  • 1 in center lines
  • Wear gloves and eye protection when handling metal hanger strap to avoid injury
  • Cut hanger strap to desired L
  • Using approved hardware (not provided), secure hanger strap with nail or screw to joist or stub member
  • Alternating 1/4 and 3/16 in hole
  • 24 ga steel