PHD
PHD 345 0037EG Top Beam Clamp, 3/8 in Rod, 610 lb Load, Carbon Steel, Electro-Galvanized
PHD Top Beam Clamp, FIG 345 Series, 3/8 in Rod, 610 lb, For Use With: 4 in Pipe, Carbon Steel, Electro-Galvanized
Documents
- Low carbon steel with hardened steel cup point set screw and locknut
- Note : When a torque wrench is unavailable, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added
- Set screw must contact the sloped side of the I-beam, channel or other applicable building structure
- Clamp must always be installed in top orientation, with the arrow mark on clamp pointing up
- Underwriters laboratories listed in the US (UL) and Canada
- 60 in-lb torque set screw
- Standard/Approvals: ANSI/SP 69/58 (Type 30)|cULus Listed|Federal A-A-1192A (Type 30)|FM Approved
- WARRANTY: 1 Year
PHD Top Beam Clamp, FIG 345 Series, 3/8 in Rod, 610 lb, For Use With: 4 in Pipe, Carbon Steel, Electro-Galvanized
Designed for attaching a hanger rod to the top flange of a beam or bar joist where the flange thickness does not exceed 3/4 in (19.05 mm). The open U design permits rod adjustment.
- Brand:Â PHDFinish:Â Electro-GalvanizedLoad Capacity:Â 610Material:Â Carbon SteelRod Size:Â 3/8Series:Â FIG 345Suitable For Use With:Â 4 in Pipe