Takagi

Takagi TH3DVNG H3 Tankless Water Heater, Natural Gas Fuel, 199000 Btu/hr Heating, Indoor/Outdoor: Indoor, Condensing/Non Condensing: Condensing, 10 gpm, 4 in Power Direct Vent, 0.93, Commercial/Residential/Dual: Dual, Ultra Low NOx: Yes

1137158 MFG #: 100123383
$2,342.00 / ea
  • Commercial/Residential/Dual: Commercial/Residential
  • Condensing/Non condensing: Condensing
  • Dimensions: 17-3/4 in W x 11-1/4 in D
  • Energy Factor: 0.93
  • Flow Rate: 10
  • Fuel Type: Natural Gas
  • Gas Connection: 3/4 in MNPT
  • Heating Capacity: 199000
  • Ignition Type: Electronic Spark
  • Indoor/Outdoor: Indoor
  • Material: 316L Stainless Steel/Copper
  • Mounting Type: Wall
  • Pressure Rating: 4 to 10-1/2 in WC Gas/15 to 150 psi Water
  • Series: H3
  • Ultra Low NOx: Yes
  • Vent Size: 4
  • Vent Type: Direct/Power
  • Water Connection: 3/4 in MNPT

Takagi Tankless Water Heater, Series: H3, 199000 Btu/hr Heating, Natural Gas, 3/4 in MNPT Gas Connection, Electronic Spark Ignition, Power Direct Vent, 4 in Vent, Condensing/Non condensing: Condensing, 10 gpm, Energy Factor: 0.93, Wall Mount, 3/4 in MNPT Water Connection, 4 to 10-1/2 in WC Gas/15 to 150 psi Water, Ultra Low Nox: Yes, 316L Stainless Steel/Copper, Indoor/Outdoor: Indoor, 17-3/4 in W x 11-1/4 in D, Commercial/Residential/Dual: Dual

The T-H3-DV-N supplies hot water to domestic hot water systems (directly or indirectly) which can be used with storage tanks, recirculation systems, hydronic heating systems, radiant floor systems and/or domestic and heating applications.

QTY
  • Features
  • Primary heat exchanger utilizes commercial-grade copper alloy for 25 times better heat transfer than stainless steel
  • Secondary heat exchanger utilizes 316L stainless steel for better corrosion resistance
  • Easy-link up to 4 units without a multi-unit controller
  • Multi-Link up to 20 units with a multi-unit controller
  • Number of showers unit can handle, depending on ground water temperature
  • Venting with SCH 40/STD PVC, CPVC, PP, category III stainless steel
  • Safety features include freeze, overheat, surge protection and troubleshooting diagnostic codes
  • Integrated temperature controller and advanced diagnostics
  • Complies with ultra-low NOx regulations of less than 14 ng/J
  • Standard/Approvals: AHRI Certified, ANSI Z21.10.3, ASHRAE 90.1-2007, CSA 4.3, cCSAus Certified, EnergyStar® Qualified, Low Lead IAPMO R and T Certified, NSF/ANSI 5, SCAQMD Rule 1146.2
  • INCLUDES: Integrated Controls and Power Cord
  • WARRANTY: 15 Years Limited Heat Exchanger, 5 Years Limited P