Sioux Chief PowerPEX® V-Sleeve™ 649TX2 V-Sleeve, 1/2 in Nominal, Stainless Steel, Domestic

1122538 MFG #: 649TX2
$0.51 / ea
Sioux Chief PowerPEX® V-Sleeve™ 649TX2 V-Sleeve, 1/2 in Nominal, Stainless Steel, Domestic
  • Domestic/Import: Domestic
  • Material: Stainless Steel
  • Nominal Size: 1/2
  • Series: 649

Tomahawk PowerPEX® V-Sleeve™ V-Sleeve, Series: 649, 1/2 in Nominal Size, Stainless Steel, Domestic

Sioux Chief's V-Sleeve stainless steel compression system is to be used to plumb any hot and cold potable plumbing application or radiant heat application. V-Sleeve is to be used with any SDR-9 PEX tubing and size specific ASTM F2159 or ASTM F1807 fitting. V-Sleeve's design shall allow for 360-degree compression over sealing barbs and 360-degree visual inspection of a properly inserted pipe. V-Sleeve's length and seal shall position sleeve compression directly over sealing barbs including the lead-in barb. V-Sleeve shall be F-877 certified.

Pack: 1000/CS
QTY
Add to List
  • Features
  • Videos
  • Visibility of tube fully inserted in sleeve and to tube stop on fitting
  • V-Sleeves™ are to be used with ASTM F1807 and F2159 PEX fittings in conjunction with any SDR9 PEX tubing manufactured to the ASTM F876 or ASTM F877
  • 360 deg visibility of crimped sleeve
  • 360 deg compression on all sealing surface areas
  • Sleeve can be pre-loaded onto fitting or tube
  • V-Sleeve must be installed using a Sioux chief 305-8_TX compression tool
  • Third party tested to ASTM F877, UPC listed
  • Stainless steel PEX sleeve
  • 0.595 in height
  • 0.718 in width
  • 0.64 in ID
  • Proudly made in America
  • Standard/Approvals: ASTM F1807